Linux version 2.6.21-ARCH (root@Wohnung) (gcc version 4.1.2 20070423 (prerelease)) #1 SMP PREEMPT Fri May 25 18:51:33 CEST 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000e8000 size: 0000000000018000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000000c2f0000 end: 000000000c3f0000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000c3f0000 size: 0000000000010000 end: 000000000c400000 type: 3 copy_e820_map() start: 00000000fffc0000 size: 0000000000040000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000c3f0000 (usable) BIOS-e820: 000000000c3f0000 - 000000000c400000 (ACPI data) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 195MB LOWMEM available. Entering add_active_range(0, 0, 50160) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 50160 HighMem 50160 -> 50160 early_node_map[1] active PFN ranges 0: 0 -> 50160 On node 0 totalpages: 50160 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 359 pages used for memmap Normal zone: 45705 pages, LIFO batch:15 HighMem zone: 0 pages used for memmap DMI not present or invalid. ACPI: RSDP 000FA5D0, 0014 (r0 QEMU ) ACPI: RSDT 0C3F0000, 002C (r0 QEMU QEMURSDT 1 QEMU 1) ACPI: FACP 0C3F002C, 0074 (r0 QEMU QEMUFACP 1 QEMU 1) ACPI: DSDT 0C3F0100, 0832 (r1 BXPC BXDSDT 1 INTL 20060912) ACPI: FACS 0C3F00C0, 0040 ACPI: APIC 0C3F0938, 0040 (r0 QEMU QEMUAPIC 1 QEMU 1) ACPI: PM-Timer IO Port: 0xb008 Allocating PCI resources starting at 10000000 (gap: 0c400000:f3bc0000) Built 1 zonelists. Total pages: 49769 Kernel command line: initrd=initrd.img rootdelay=5 BOOT_IMAGE=vmlinuz Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (01192000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 1024 (order: 10, 4096 bytes) Detected 2131.778 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 169120k/200640k available (2317k kernel code, 30864k reserved, 763k data, 268k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff83000 - 0xfffff000 ( 496 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xcd000000 - 0xff7fe000 ( 807 MB) lowmem : 0xc0000000 - 0xcc3f0000 ( 195 MB) .init : 0xc0409000 - 0xc044c000 ( 268 kB) .data : 0xc03435f1 - 0xc040228c ( 763 kB) .text : 0xc0100000 - 0xc03435f1 (2317 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4020.01 BogoMIPS (lpj=8040024) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 078be9fd 2191abfd 00000000 00000000 00000001 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 078be9fd 2191abfd 00000000 00000420 00000001 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 11k freed Early unpacking initramfs... done ACPI: Core revision 20070126 ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. ACPI: setting ELCR to 0800 (from 0a00) CPU0: AMD QEMU Virtual CPU version 0.9.0 stepping 03 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfa110, last bus=0 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S5) ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, * this clock source is slow. Consider trying other clock sources PCI quirk: region b000-b03f claimed by PIIX4 ACPI PCI quirk: region b100-b10f claimed by PIIX4 SMB Boot video device is 0000:00:02.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 6 devices SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Time: tsc clocksource has been installed. PM-Timer running at invalid rate: 1680% of normal - aborting. PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 5, 131072 bytes) TCP bind hash table entries: 8192 (order: 4, 98304 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered checking if image is initramfs... it is Clocksource tsc unstable (delta = 441879165 ns) Time: pit clocksource has been installed. Freeing initrd memory: 25364k freed apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Limiting direct PCI/PCI transfers. PCI: PIIX3: Enabling Passive Release on 0000:00:01.0 Activating ISA DMA hang workarounds. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Freeing unused kernel memory: 268k freed libata version 2.20 loaded. ata_piix 0000:00:01.1: version 2.10ac1 PCI: Setting latency timer of device 0000:00:01.1 to 64 ata1: PATA max MWDMA2 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001c000 irq 14 ata2: PATA max MWDMA2 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001c008 irq 15 scsi0 : ata_piix ata1.00: ATA-7: QEMU HARDDISK, 0.9.0, max UDMA/100 ata1.00: 10485760 sectors, multi 16: LBA48 ata1.00: configured for MWDMA2 scsi1 : ata_piix ata2.00: ATAPI, max UDMA/100 ata2.00: configured for MWDMA2 scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 0.9. PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM QEMU QEMU CD-ROM 0.9. PQ: 0 ANSI: 5 ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 eth0: RealTek RTL-8029 found at 0xc100, IRQ 11, 52:54:00:12:34:56. PPP generic driver version 2.4.2 sr0: scsi3-mmc drive: 4x/4x xa/form2 tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 SCSI device sda: 10485760 512-byte hdwr sectors (5369 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: disabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 10485760 512-byte hdwr sectors (5369 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 0:0:0:0: Attached scsi disk sda FDC 0 is a S82078B md: linear personality registered for level -1 md: multipath personality registered for level -4 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 299.000 MB/sec raid5: using function: pIII_sse (299.000 MB/sec) raid6: int32x1 771 MB/s raid6: int32x2 752 MB/s raid6: int32x4 644 MB/s raid6: int32x8 488 MB/s raid6: mmxx1 1033 MB/s raid6: mmxx2 1631 MB/s raid6: sse1x1 912 MB/s raid6: sse1x2 1330 MB/s raid6: sse2x1 1224 MB/s raid6: sse2x2 1468 MB/s raid6: using algorithm sse2x2 (1468 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: raid10 personality registered for level 10 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: (BMDMA stat 0x5) ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x46 data 32 in res 41/50:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA2 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: (BMDMA stat 0x5) ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x46 data 32 in res 41/50:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA2 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: (BMDMA stat 0x5) ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x46 data 32 in res 41/50:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA2 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: (BMDMA stat 0x5) ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x46 data 32 in res 41/50:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA2 ata2: EH complete sr0: CDROM (ioctl) error, command: <6>cdb[0]=0x46 46 00 00 00 00 00 00 00 20 00 sr: Current [descriptor]: sense key=0xb ASC=0x14 ASCQ=0x0 ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: (BMDMA stat 0x5) ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x46 data 32 in res 41/50:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA2 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: (BMDMA stat 0x5) ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x46 data 32 in res 41/50:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA2 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: (BMDMA stat 0x5) ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x46 data 32 in res 41/50:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA2 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: (BMDMA stat 0x5) ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x46 data 32 in res 41/50:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA2 ata2: EH complete sr0: CDROM (ioctl) error, command: <6>cdb[0]=0x46 46 00 00 00 00 00 00 00 20 00 sr: Current [descriptor]: sense key=0xb ASC=0x14 ASCQ=0x0 ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: (BMDMA stat 0x5) ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x46 data 16 in res 41/50:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA2 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: (BMDMA stat 0x5) ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x46 data 16 in res 41/50:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA2 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: (BMDMA stat 0x5) ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x46 data 16 in res 41/50:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA2 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: (BMDMA stat 0x5) ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x46 data 16 in res 41/50:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA2 ata2: EH complete sr0: CDROM (ioctl) error, command: <6>cdb[0]=0x46 46 00 00 28 00 00 00 00 10 00 sr: Current [descriptor]: sense key=0xb ASC=0x14 ASCQ=0x0 ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: (BMDMA stat 0x5) ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x46 data 24 in res 41/50:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA2 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: (BMDMA stat 0x5) ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x46 data 24 in res 41/50:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA2 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: (BMDMA stat 0x5) ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x46 data 24 in res 41/50:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA2 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: (BMDMA stat 0x5) ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x46 data 24 in res 41/50:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA2 ata2: EH complete sr0: CDROM (ioctl) error, command: <6>cdb[0]=0x46 46 00 00 20 00 00 00 00 18 00 sr: Current [descriptor]: sense key=0xb ASC=0x14 ASCQ=0x0 ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: (BMDMA stat 0x5) ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x46 data 32 in res 41/50:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA2 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: (BMDMA stat 0x5) ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x46 data 32 in res 41/50:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA2 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: (BMDMA stat 0x5) ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x46 data 32 in res 41/50:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA2 ata2: EH complete ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: (BMDMA stat 0x5) ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x46 data 32 in res 41/50:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting port ata2.00: configured for MWDMA2 ata2: EH complete sr0: CDROM (ioctl) error, command: <6>cdb[0]=0x46 46 00 00 00 00 00 00 00 20 00 sr: Current [descriptor]: sense key=0xb ASC=0x14 ASCQ=0x0 ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. EXT2-fs warning: mounting fs with errors, running e2fsck is recommended EXT2-fs error (device sda): ext2_check_page: bad entry in directory #2: rec_len is smaller than minimal - offset=0, inode=0, rec_len=0, name_len=0 kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode.